Proface APL3000B - Node Box PC Manual de usuario descargar pdf (Pagina 48)

Chapter 2 System Setup

2-27

2.2.4 Security

Supervisor Password Is

Displayed as “Set” when the password is set. Since no password has been set at factories, the factory default

setting is [Clear].

User Password Is

Displayed as “Set” when the password is set. Since no password has been set at factory, the factory default

setting is [Clear]. Note that BIOS setting is not allowed with a User Password.

Set Supervisor Password / Set User Password

Specifies a password. When any password is not needed, do not input any values in the new password setting

and press just the [Enter] key.

Fixed disk boot sector

Specifies whether writing into the boot sector on the unit is not allowed. Select from [Normal] or [Write

Protect]. The factory default setting is [Normal].

Password on boot

Specifies whether a password should be needed at the Start-Up. Select from [Enabled] or [Disabled]. The

factory default setting is [Disabled].

1 2 ... 43 44 45 46 47 48 49 50 51 52 53 ... 106 107

Sin comentarios

Proface APL3000B - Node Box PC Manual de usuario Pagina 48